PV Powered 2500 Installationsanleitung PDF herunterladen (Seite 27)

SMA Technologie AG Installation

Installation Guide SB25_30-11:SE0307 Page 27

5. Now screw the threaded sleeve (7) onto the socket element (8) and tighten it.

6. Now screw the pressure screw (9)

into the threaded sleeve (10) and

tighten it. The cord grip with the

sealing ring is pressed into the

threaded sleeve and can no longer

be seen.

The AC connection socket is now fully assembled.

If you are not going to connect up the Sunny Boy immediately, close the socket element

using the cap supplied in the accessories kit.

If the Sunny Boy is already installed, you can now connect up the fully assembled AC

connection socket to the flange plug on the Sunny Boy. To do this, remove the protective

cap from the flange plug on the Sunny Boy. Firmly tighten the threaded ring on the AC

connection socket to the flange plug to seal the connection and secure it.

Warning!

Do not switch the line circuit breaker on yet! The Sunny Boy may only be

connected to the AC grid once the PV strings are connected and the device

is securely closed.

(7)

(8)

(

)

(10)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 65 66

Keine Kommentare

PV Powered 2500 Installationsanleitung Seite 27