PV Powered PVP1800 Spezifikationen PDF herunterladen (Seite 6)

PV Powered LLC 5 11-18-28-704

2.0 INSTALLATION

2.1 Selecting a Location for the StarInverter

In choosing a location for the StarInverter, consideration should be given to the following

criteria:

♦ The heat sink temperatures can exceed 158 degrees (70° C). The StarInverter

must be installed so that the top of the unit is not expected to be contacted by

persons.

♦ The StarInverter is suitable for installation both indoors and outdoors and the

enclosure has been given a NEMA 3R rating.

♦ When the StarInverter is installed outdoors, it should be shielded from rain and

direct sunlight, if possible.

♦ The StarInverter is designed to handle the temperature extremes of most

climates. The operating and non-operating ambient temperature range is from

-25° C to 40° C.

♦ The following clearances are recommended for proper placement of the

StarInverter:

• A minimum 36″ clearance between the bottom of the inverter box and

the ground.

• A minimum 12″ clearance above the inverter box for ventilation.

• A minimum 8” clearance around the side of the inverter box so that all

Warning and Caution labels are clearly visible and able to be easily

read.

• Visibility of the operating LED’s and display located at the top front of

the inverter box should also be considered.

♦ If the StarInverter is to be installed in an enclosed cabinet or closet, external

ventilation must be provided to allow for sufficient heat dissipation.

♦ At all times, air circulation around the inverter box must be sufficient.

1 2 3 4 5 6 7 8 9 10 11 ... 33 34

Keine Kommentare

PV Powered PVP1800 Spezifikationen Seite 6