PV Powered PVP1800 Spezifikationen PDF herunterladen (Seite 9)

PV Powered LLC 8 11-18-28-704

If installing the PVP1100 with the optional AC DC Disconnect Box, see step 2.2.b. If

installing the PVP1100 without the AC DC Disconnect Box or if installing the PVP1800 or

PVP2800, please proceed to section 2.3 Electrical Connection.

PLEASE NOTE: Leave the inverter cover off to allow for electrical

connection in section 2.3.

2.2.b Attaching the OPTIONAL AC DC Disconnect Box*

*NOTE: Certain utility companies require this equipment per regulations. If

you are unsure of these regulations, contact the utility provider. If the

Disconnect Box is not required, proceed to section 2.3.

1. Attach the optional StarInverter AC DC Disconnect Box as depicted in Figures 7

through 9. Holes are threaded for four 10-32 screws at the top of the AC DC

Disconnect Box. Place the screws through the holes in the bottom of the

PVP1100 and into the top of the Disconnect Box.

2. Tighten the four screws to a torque value between 2.0 and 2.5 Nm.

Figure 7: AC DC Disconnect Box Figure 8: Location of screw holes for AC DC

Disconnect Box

Figure 9: Installed AC DC Disconnect Box

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Keine Kommentare

PV Powered PVP1800 Spezifikationen Seite 9