PV Powered 5200 Spezifikationen Seite 21

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 96
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 20
20 DOCR 070366-B
Read all of these instructions, cautions, and warnings for the Solec-
tria PVI inverter and associated PV array documentation.
Installation and commissioning must be performed by a licensed
electrician in accordance with local, state, and National Electrical
Code ANSI/NFPA 70 requirements.
The installation and wiring methods used in the installation of this
inverter in the U.S. must comply with all US National Electric Code
requirements (NEC) and local Authority Having Jurisdiction (AHJ)
requirements. In Canada, the installation and wiring methods used
must comply with the Canadian Electric Code, parts I and II, and
the local AHJ requirements. System grounding when required by
the Canadian Electrical Code, Part 1, is the responsibility of the
installer.
These servicing instructions are for use by qualied personnel only.
To reduce the risk of electric shock, refer all servicing to factory
qualied service personnel. No user serviceable are contained
inside the inverter.
To reduce the risk of re, connect only to a circuit provided with
dedicated circuit overcurrent protection in accordance with the
National Electrical Code, ANSI/NFPA70.
The unit or system is provided with xed trip limits and shall not be
aggregated above 30KW on a single point of common connection.
In order to be able to carry out an accurate energy measurement,
a revenue meter measuring kWh may be used between the feed-in
point and the inverter.
3 Installation
WARNING!
AVERTISSEMENT!
WARNING!
AVERTISSEMENT!
WARNING!
AVERTISSEMENT!
INFORMATION!
INFORMATIONS!
WARNING!
AVERTISSEMENT!
CAUTION!
PRUDENCE!
CAUTION!
PRUDENCE!
Terminals in Figure 12 Wire size permitted
Required torque
*
3, 4, 5, 6, 7, 8 (see location and
description above)
14 - 6 AWG (2.5 - 16 mm
2
) 10.5 in-lbs (1.2 Nm)
Required torques for wiring box terminals
Table 1: Required torques for wiring box terminals
Seitenansicht 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare